Repairing the Rubber Coating of a Dishwasher Rack

Dishwashers most of the times get struck with the problem of chipped rubber coating which not only hampers the work but also kills unnecessary time too. Here is a step by step procedure to repair or fix the problem of rubber coating in dishwashers.

Step 1

the very first step and rather the most obvious thing to do is to empty the dishwasher. Pull out all the racks from it. At times, you might also need to lift up the upper rack in order to remove the rack completely. Hence, make sure that you do it as required.
Step 2

Now, scrub off all the rusted portions of the rack with the help of a steel wool pad. Once you are through with it, dry out the rack with a clean rag piece. In case the rack doesn't have any rust marks on it, wipe clean it with a cloth piece to ensure that it is dry.

Step 3

Next, apply a dishwasher rack repair rubber solution onto the chipped areas lightly with the help of a brush. Such solutions are easily available in market these days.

Step 4

Now let the solution dry out completely and apply a second coat only if required. Once you are done with the solution application, let it dry and harden for at least 24 hours.
Step 5

Once the dry coating is ensured, finish it by applying the dishwasher rack caps to the pointed prongs. Rack caps are quite inexpensive dishwasher accessory and most importantly, are it is much wiser to use them rather than applying multiple coats of repair solution on prong ends.

Step 6
Lastly, place the newly repaired racks back into the dishwasher and start using it just the way you were using it earlier.